Corrosion cell kits

The kits consist of glass cells (also available in double jacketed version for temperature stabilization), electrodes, caps adapted for electrodes mounting and other accessories necessary during measurements.

This cell has a volume of 250 mL and is adapted to perform AC or DC experiments on flat specimen. Sample is mounted outside a cell and reaction takes place on the hole of 1 cm² or 10 cm² area.

This cell is dedicated for testing flat coated material samples (protection surfaces, paintings etc.). The coating cell consists of a glass tube mounted on a square nylon base (surface 100 cm²). O-ring placed between the tested sample and the bottom of the glass body prevents from leakage.

This cell was developed to evaluate a plate material such as a metal or semi-conducting plate. The sample plate is sandwiched between the two teflon cell blocks.

Thanks to the modular design of the flat cell, it is possible to set two different materials at each end of the cell.

Avesta cell is an electrochemical cell developed for pitting corrosion testing (ASTM G150). It is designed to avoid microcrevice corrosion formed between the working electrode and the gasket at the bottom aperture of the cell. A filter paper ring placed between the sample and the gasket is flooded by distilled water in order to eliminate crevice corrosion. The water flow is controlled by a peristaltic pump (EL-AV-008) which delivers 0.5 to 5 mL/h.